From RROCA-info

• Hydramatic Workshop Manual Introduction

• 1.1 General Description

• 1.2 Mechanical Arrangement

• 1.3 Gear_Ratios

• 1.4 Automatic_Control

• 1.5 Fluid Coupling

• 1.6 Front Epicyclic Unit

• 1.7 Rear Epicyclic Unit

• 1.8 Reverse Epicyclic Unit

• 1.9 Bearings and Thrust Washers

• 1.10 Band Servo Units

• 1.11 Front Oil Pump

• 1.12 Rear Oil Pump and Governor

• 1.13 Control Linkage

• 1.14 Oil Circulation

• 1.15 Control Pressures

• 1.16 Valve Operations

• 1.17 Selector Positions

• 2.1 Servicing

• 2.2 Testing

• 2.3 Fault Diagnosis

• 2.4 Linkages

• 2.5 Air Pressure check and investigation

• 3 Overhaul and Index

• 3.1 Gearbox to remove and fit

• 3.2 Fluid Coupling

• 3.3 Side Cover Sump and Filter

• 3.4 Control Valve Unit

• 3.5 Parking_Bracket

• 3.6 Front and Rear Servo Units

• 3.7 Rear Pump and Governor

• 3.8 Pressure Control Valve

• 3.9 Front Pymp and Drive Shaft

• 3.10 Ride Control Unit

• 3.11 Speedometer Drive

• 3.12 Roadwheel brake servo drive

• 3.13 Reverse Assembly

• 3.14 Drum Assembly

• 3.15 Gearbox casing

• Chapter_4