From RROCA-info
CATALOGUE OF PARTS
40-50 H.P. CHASSIS ("NEW PHANTOM")
SERIES V, W & X
ISSUED OCTOBER 1926
ENGINE SECTION
CRANK AND CAM SHAFTS
| Description | No.Off. | Piece No. | Code Word | |
|---|---|---|---|---|
| Bearing, Camshaft (centre) | 1 | E | 70169/70a | Bayzeley |
| Bearing, Camshaft (front). Pitch circle of holes . 3.900". (Used on part of Series "V") | 1 | E | 70171 | Beabey |
| Bearing. Camshaft (front). Pitch of circle holes . 4". (Use on part of Series "V" and on "W" and "X") | 1 | E | 72955 | Beacham |
| Bearing, Camshaft (Intermediate) | 1 | E | 71258/9a | Beacon |
| Bearing, Camshaft (Intermediate) | 1 | E | 70174/5a | Beadmore |
| Bearing, Camshaft (Intermediate) | 1 | E | 70176/7a | Beadnell |
| Bearing, Camshaft (intermediate) | 1 | E | 71302/3a | Beadome |
| Cage Ball, with Balls | 1 | E | 70166a | Beagley |
| Camshaft | 1 | E | 72848 | Bealby |
| Cap, Oil Crankpin | 12 | E | 70258 | Beamand |
| Cap, Oil Journal | 12 | E | 70259 | Beanes |
| Crankshaft, Complete | 1 | - | Beanlands | |
| Key, Woodruff for camshaft gear wheel. A = 3/4" | 1 | E | 14707 | Beardall |
| Key, Woodruff, for spring drive A = 5/8" | 1 | E | 14705 | Beardom |
| Nut, for crankpin oil cup | 6 | E | 70268 | Beardsell |
| Nut, for crankpin oil cup | 6 | E | 70269 | Beardshaw |
| Nut, for journal oil cup | 7 | E | 70266 | Beardsley |
| Nut, Retaining, Camshaft GearWheel | 1 | E | 70162 | Beardwell |
| Nut, Withdrawing | 1 | E | 70163 | Bearmon |
| Plate, Packing, for crankshaft oil plug | 12 | E | 70272 | Beach |
| Plate, Locking, for camshaft nut | 1 | E | 70164 | Beasante |
| Plug, Oil, for crankpin | 12 | E | 70271 | Beastall |
| Screw for crankpin oil cap | 12 | E | 70270 | Beatson |
| Stud for oil cap (front) | 1 | E | 70821a | Beauchamp |
| Stud for crankpin oil caps. A= 3 3/4" | 6 | E | 70265a | Beauclerk |
| Stud for oil plug (rear) | 1 | E | 74284a | Beaufoy |
| Stud for oil caps, central bearings. A = 4 9/32" | 1 | E | 70263a | Beauvais |
| Stud for oil caps, intermediate bearings. A= 3 9/32" | 4 | E | 70264a | Bechal |
| § Washer Adjusting, for camshaft gear wheel. 0.030" thick | 1 | E | 74491 | Beckam |
| § Washer Adjusting, for camshaft gear wheel. 0.035" thick | 1 | E | 74492 | Becker |
| § Washer Adjusting, for camshaft gear wheel. 0.040" thick | 1 | E | 74493 | Beckerson |
| § Washer Adjusting, for camshaft gear wheel. 0.045" thick | 1 | E | 74494 | Beckett |
| § Washer Adjusting, for camshaft gear wheel. 0.050" thick | 1 | E | 74495 | Beckford |
| Washer, Thrust, for front camshaft bearing | 1 | E | 70165 | Beckley |
| Washer, Thrust, for front camshaft bearing | 1 | E | 70167 | Beckman |
| Wheel, Camshaft Gear | 1 | E | 70168 | Bedbrook |
§ Alternatives
