From RROCA-info
CATALOGUE OF PARTS
40-50 H.P. CHASSIS ("NEW PHANTOM")
SERIES V, W & X
ISSUED OCTOBER 1926
ENGINE SECTION
FAN
| Description | No.Off. | Piece No. | Code Word | |
|---|---|---|---|---|
| Bearing, Ball Journal (inner) 52mm. x20 mm. x 15 mm. | 1 | Hoff. | 320 | Roker |
| Bearing, Ball Journal (outer) 40 mm. x 17 mm. x 12 mm. | 1 | Hoff. | 117 | Broadseal |
| Belt, complete, for driving fan, 47 1/2" long (approx.) - | 1 | E | 22312 | Bandy |
| Body, Trunnion | 1 | E | 71112 | Banford |
| Bracket, Fan | 1 | E | 71091a | Bangester |
| Cap for oil gun lubricator | 1 | E | 9775 | Enunciate |
| Cover, End, for hub | 1 | E | 72828 | Banister |
| Fan Blades, complete with flange | 1 set | E | 73290a | Banfill |
| Lubricator, Oil Gun | 1 | E | 9772 | Epsomite |
| Nut, Castellated, for bracket screw | 1 | E | 7702 | Bankart |
| Nut, Spindle Retaining | 1 | E | 71099 | Bankhead |
| Packing, Felt, for retaining ring | 1 | E | 71102 | Bankover |
| Piece, Distance, for ball bearings | 1 | E | 72829 | Bannerman |
| Pin, Retaining, trunnion body | 1 | E | 71113 | Banning |
| Pulley, Fan Driving, complete with hub | 1 | E | 73754a | Bansall |
| Ring, Retaining, for pulley hub | 1 | E | 72830 | Banshack |
| Rod, Adjusting | 1 | E | 71110 | Banting |
| Screw, Set, for adjusting rod | 1 | E | 71114 | Banyard |
| Screw, Thumb, for adjusting rod | 1 | E | 71115 | Banyon |
| Screw for trunnion pin | 1 | E | 15107 | Barbrook |
| Spindle, Fan | 1 | E | 72827a | Barbut |
| Spring for adjusting rod | 1 | E | 71111 | Barcham |
| Washer for adjusting rod | 1 | E | 6473 | Barclay |
| Washer, Paper, between fan and hub | 1 | E | 71101 | Barclow |
| Washer, Paper, for spindle retaining nut | 1 | E | 71100 | Bardall |
