From RROCA-info
CATALOGUE OF PARTS
40-50 H.P. CHASSIS ("NEW PHANTOM")
SERIES V, W & X
ISSUED OCTOBER 1926
ENGINE SECTION
GOVERNOR, IGNITION, AND DISTRIBUTOR DRIVE
| Description | No.Off. | Piece No. | Code Word | |
|---|---|---|---|---|
| Baffle, Oil (Parts of Rolls-Royce Patent No. 202885.) | 1 | E | 72381 | Belfrage |
| Bearing, Ball Journal, 37 mm. x 12mm. x 12mm. | 1 | Hoff. | 312 | Belger |
| Cone for drive shaft | 1 | E | 72483 | Belham |
| Cover for oil relay cylinder | 1 | E | 72377a | Belier |
| Cover for filter. (Used on part of Series "V") | 1 | E | 72375a | Belinfant |
| Cover for filter. (Used on part of Series "V" and on "W" and X.) | 1 | E | 73134 | Belkin |
| Crosshead for return spring | 1 | E | 72506 | Bellamy |
| Cup for Piston | 1 | E | 72502 | Bellars |
| Cylinder, Oil. Relay | 1 | E | 72376a | Bellasis |
| Filter for oil relay | 1 | E | 72507a | Bellaty |
| Fork, Spigot, for governor spindle | 1 | E | 72463 | Bellenger |
| Housing Ignition Governor | 1 | E | 72378a | Bellenie |
| Lever, Actuating (short) | 1 | E | 72504 | Bellewes |
| Lever, Control, to oil relay from centrifugal governor | 1 | E | 72450 | Bellgrove |
| Nut, Cap, for filter easing | 1 | E | 72505 | Bellhouse |
| Nut, Castellated. for governor spindle | 1 | E | 6432 | Actinia |
| Nut for bearing spindle | 1 | E | 72472 | Belliars |
| Nut, Retaining, for ball bearing | 1 | E | 72492 | Belliss |
| Nut, Retaining, for piston | 1 | E | 72501 | Belliston |
| Nut, Retaining, for sliding sleeve | 1 | E | 72467 | Bellmont |
| Piece, Distance, for Sliding Sleeve | 1 | E | 72465 | Bellott |
| Pin, Cotter, for lever | 1 | E | 72321 | Boardman |
| Piston, Oil Relay (Part of Rolls-Royce Patent No. 247304.) | 1 | E | 72509 | Bellsham |
| Plug, Cylinder Cover | 1 | E | 72495 | Bellsmith |
| Plug for governor tower | 1 | E | 50985 | Belshaw |
| Rod, Connecting | 1 | E | 72649a | Benbow |
| Screw, Adjusting, for ball end | 1 | E | 72498 | Bendall |
| Screw for fixing oil relay-control arm | 1 | E | 15958 | Bendelow |
| Screw, Set, for actuating spigot | 1 | E | 72461 | Bendix |
| Shaft, Control | 1 | E | 72519a | Bendixen |
| Sleeve for oil trap (Parts of Rolls-Royce Patent No. 202885.) | 1 | E | 72487 | Bendon |
| Spigot, Actuating | 1 | E | 72464 | Bene |
| Description | No.Off. | Piece No. | Code Word | |
|---|---|---|---|---|
| Spindle, Ignition Governor, complete (Rolls— Royce Patents Nos. 198014 and 247306) | 1 | E | 72489a | Benfleet |
| Spindle for oil relay control lever | 1 | E | 72460 | Benhadad |
| § Spring, Governor | 2 | E | 73203 | Benhilton |
| § Spring, Governor | 2 | E | 73152 | Benislove |
| Spring, Outer Return, for piston | 1 | E | 72497 | Bennet |
| Stud, Control Arm | 2 | E | 50023 | Bencey |
| Stud, securing cover to cylinder | 3 | E | 18439 | Bennion |
| Stud securing cylinder to housing | 4 | E | 50745 | Clemow |
| Tower, Governor | 1 | E | 72508a | Bennoson |
| Valve, Relay (Part of Rolls-Royce Patent No. 247304.) | 1 | E | 72503 | Benoist |
| § Washer, Adjusting,for ball hearing. | 1 | E | 72484 | Benoliel |
| § Washer, Adjusting,for ball hearing. | 1 | E | 72485 | Benoly |
| § Washer, Adjusting,for ball bearing. | 1 | E | 72486 | Benrather |
| Washer, Adjusting,for gear wheel | 1 | E | 72481 | Bensbu rg |
| § Washer, Adjusting, for piston return spring. 0.070" thick | 1 | E | 73126 | Bensinger |
| § Washer, Adjusting, for piston return spring. 0.080" thick | 1 | E | 73127 | Benskin |
| § Washer, Adjusting, for piston return spring. 0.090" thick | 1 | E | 73128 | Bensley |
| § Washer, Adjusting, for piston return spring. 0.100" thick | 1 | E | 73129 | Bensusan |
| § Washer, Adjusting, for piston return spring. 0.040" thick | 1 | E | 73504 | Bentham |
| § Washer, Adjusting, for piston return spring. 0.050" thick | 1 | E | 73505 | Bentinck |
| § Washer, Adjusting, for piston return spring. 0.060" thick | 1 | E | 73506 | Benton |
| Washer, Fibre, for filter cover | 1 | E | 72647 | Benwood |
| Washer, Fibre, for oil relay cylinder | 1 | E | 72648 | Benyon |
| Washer, Fibre, for governor tower plug | 1 | E | 10725 | Beracry |
| Washer for governor bearing spindle | 2 | E | 72517 | Clemson |
| Washer for governor spring | 2 | E | 72943 | Berbice |
| Washer, Locking for bearing spindle nut | 2 | E | 72471 | Berdoe |
| Washer, Locking, for spigot screw . | 2 | E | 72080 | Berenger |
| Washer, Paper, for governor housing. A= 2.775" | 1 | E | 725l2 | Beresford |
| Washer; Paper, for governor tower. A 2.575" | 1 | E | 72513 | Bergeot |
| Washer, Paper, for oil relay cylinder cover | 1 | E | 72646 | Berger |
| Washer, Paper, for oil relay cylinder | 1 | E | 72645 | Bergman |
| Washer for piston head | 1 | E | 72500 | Bergson |
| Washer for sliding sleeve | 2 | E | 72466 | Beries |
| Wheel, Gear Driven | 1 | E | 72488 | Beringere |
| Wire, Locking, for ball bearing retaining nut | 1 | E | 9258 | Berket |
| Wire, Locking, for governor sleeve nut | 1 | E | 72514 | Bemister |
| Wire, Locking, for piston retaining nut | 1 | E | 72644 | Berliet |
§ Alternatives
