From RROCA-info
CATALOGUE OF PARTS
40-50 H.P. CHASSIS ("NEW PHANTOM")
SERIES V, W & X
ISSUED OCTOBER 1926
ENGINE SECTION
GOVERNOR, THROTTLE, AND WATER PUMP DRIVE
| Description | No.Off. | Piece No. | Code Word | |
|---|---|---|---|---|
| Bearing, Ball Journal, 20 mm. x 47mm. x 19.05 mm. | 1 | E | 72218 | Amdur |
| Bearing for water pump drive | 1 | E | 72103 | Amelius |
| Block for thrust guide. (Used on part of Series .V .) | 1 | E | 73325 | Amette |
| Block for thrust guide. (Used on part, of Series "V" and on "W " and "X ") | 1 | E | 72086 | Amherst |
| Bolt for oil catcher | 2 | E | 73750 | Amiel |
| Bolt for securing governor to pinion | 6 | E | 72096 | Amigo |
| Bush, Bearing, for actuating shaft | 1 | E | 72065 | Amondsen |
| Bush, Contracting, for drive coupling | 1 | E | 72094 | Amos |
| Casing for governor. (Used on part of Series .V .) | 1 | E | 73322a | Amphlett |
| Casing for governor. (Used on part, of Series "V" and on "W " and "X ") | 1 | E | 72089a | Ampleford |
| Catcher, Oil for governor casing | 1 | E | 73897 | Amsler |
| Coupling, Water Pump Drive | 1 | E | 72101a | Amstell |
| Cover, Oil Retaining | 1 | E | 72102 | Amsterdam |
| Flange, serrated coupling to water pump | 1 | E | 72105 | Anacker |
| Governor, Complete | 1 | E | - | Anchell |
| Housing for water pump drive shaft | 1 | E | 73896a | Ancona |
| Lever, Actuating | 1 | E | 72087 | Ancrum |
| Lever, Governor Control | 1 | E | 72643a | Andalusia |
| Nozzle, Oil, for governor casing | 1 | E | 72069 | Amsden |
| Nut, Cap. (Used on part of Series "V") | 1 | E | 73323 | Anderberg |
| Nut for bolt securing governor to pinion. | 6 | D | 1490 | Andedon |
| Nut, Coupling | 1 | E | 72095 | Anderston |
| Nut for pinion shaft | 1 | E | 72090 | Andoe |
| Nut, Retaining, for contracting bush for drive coupling | 1 | E | 72100 | Andrade |
| Nut, Retaining, for housing | 1 | E | 72104 | Angello |
| Pinion for water pump drive shaft (38 serrations). (Series "V" and "W") | 1 | E | 72108 | Angerer |
| Pinion for water pump drive shaft (20 serrations). (Series "X") | 1 | E | 74431 | Anglessey |
| Ring, Locking, for housing retaining nut | 1 | E | 9256 | Angold |
| Shalt, Actuating | 1 | E | 72088 | Angove |
| Shaft, Pinion | 1 | E | 72107 | Angus |
| Description | No.Off. | Piece No. | Code Word | |
|---|---|---|---|---|
| Shaft, Pump Drive (38 serrations). (Series "V"and "W"). | 1 | E | 73475 | Angwin |
| Shaft. Pump Drive (20 serrations) (Series "X") | 1 | E | 74432 | Annabella |
| Shaft, Sliding | 1 | E | 73476a | Annaly |
| Spring on governor shaft. A= 1 7/16". (Series "V") | 1 | E | 73531 | Annanberg |
| Spring on governor shaft. A=1 13/6.. (Series "W" and "X") | 1 | E | 73474 | Anness |
| § Washer Adjusting, for ball bearings, 0.022" thick | 2 | E | 72097 | Anning |
| § Washer. Adjusting, for ball bearings, 0.028" thick | 2 | E | 72098 | Annis |
| § Washer, Adjusting, for ball bearings, 0.036" thick | 2 | E | 72099 | Annison |
| Washer, Fibre, for cap nut | 1 | F | 8204 | Anoul |
| Washer, Locking for bearing bush | 1 | E | 72067 | Ansar |
| Washer, Locking, for oil catcher | 2 | E | 73899 | Anscornbe |
| Washer Locking, for bolt securing governor to pinion | 6 | E | 72080 | Ansdell |
| Washer, Locking, for pinion shaft nut | 1 | E | 72091 | Anson |
| Washer for oil nozzle | 1 | E | 11734 | Answorth |
| Washer for pump coupling. | 1 | E | 72050 | Anthony |
§ Alternatives
