From RROCA-info
CATALOGUE OF PARTS
40-50 H.P. CHASSIS ("NEW PHANTOM")
SERIES V, W & X
ISSUED OCTOBER 1926
ENGINE SECTION
MAGNETO AND DYNAMO DRIVES
| Description | No.Off. | Piece No. | Code Word | |
|---|---|---|---|---|
| Bearing. Ball Journal, 25 mm. x 52 mm. x 15 mm. | 1 | Hoff. | No. 125 | Roate |
| Body, Magneto Ball Joint | 1 | E | 71748a | Lochalsh |
| Bolt for oil catcher on housing | 2 | E | 73750 | Adlam |
| Bolt, Eye, for securing magneto strap, 1 7/8" long | 1 | E | 71368 | Abbad |
| Bolt, Eye, for securing magneto strap, 3 7/16" long | 1 | E | 71369 | Abberley |
| Catcher, Oil, for housing | 1 | E | 73897 | Agamber |
| Coupling, Dynamo | 1 | E | 73317 | Agassy |
| Disc, flexible, Coupling | 3 | E | 73150 | Abdy |
| Housing for gear wheel driving shaft | 1 | E | 73895a | Agelasto |
| Key, Woodruff, for gear wheel and drive shafts, 3/32" thick | 2 | E | 14704 | Votarist |
| Key, Woodruff for magneto coupling, 1/8" thick | 1 | E | 11446 | Titania |
| Magneto | 1 | E | 7l374a | Abednego |
| Nut, Locking, for dynamo drive shaft | 1 | E | 70461 | Agility |
| Nut, Locking, for dyna drive shaft bearing | 1 | E | 73268 | Abinger |
| Nut, Retaining, for adjustable coupling | 1 | E | 73175 | Albiston |
| Nut, Retaining, for dynamo drive coupling | 1 | F | 8071 | Alderton |
| Nut, Retaining, for magneto coupling | 1 | D | 70447 | Abels |
| Peg, Dowel, for magneto | 2 | E | 13622 | Woodlock |
| Piece, Tape magneto timing adjustment | 1 | E | 73176 | Alliree |
| Pin, Coupling | 9 | E | 71550 | Abelson |
| Pin for securing magneto strap | 2 | E | 71367 | Abelspies |
| Seating, Spherical | 1 | E | 73316 | Allingham |
| Shaft, Connecting to dynamo | 1 | E | 73315a | Allington |
| Shaft, Coupling, Magneto and Dynamo | 1 | E | 71551a | Alliston |
| Shaft, Driving Gear | 1 | E | 73265 | Allman |
| Sleeve for trunnion stud | 1 | E | 19102 | Carrytale |
| Spider, from coupling to dynamo | 1 | E | 7l559a | Allnatt |
| Spider, from coupling to magneto | 1 | E | 71553a | Abercorn |
| Spider, from dynamo to magneto shaft | 1 | E | 73177a | Allom |
| Spring Damping | 1 | E | 73318 | Alloway |
| Strap, Magneto Securing, complete with stud | 1 | E | 71366a | Abihu |
| Strap, Magneto Securing | 1 | E | 71366b | Abijah |
| Washer, Adjusting, for flexible coupling, 0.028" thick | 3 | E | 73l84 | Ashwin |
| Washer, Adjusting, for flexible coupling, 0.036" thick | 3 | E | 73185 | Ashworth |
| Washer, Adjusting, for flexible coupling, 0.048" thick | 3 | E | 73186 | Burtt |
| § Washer, Adjusting, for gear wheel, 0.035" thick | 1 | E | 70464 | :Allsep |
| § Washer, Adjusting, for gear wheel, 0.040" thick | 1 | E | 70465 | Arathron |
| § Washer, Adjusting, for gear wheel, 0.045" thick | 1 | E | 70466 | Cresswell |
| § Washer, Adjusting, for gear wheel, 0.050" thick | 1 | E | 70467 | Crewes |
| ^ Washer, Adjusting, for gear wheel, 0.040" thick | 1 | E | 72974 | Crichton |
| ^ Washer, Adjusting, for gear wheel, 0.050" thick | 1 | E | 72975 | Crickmay |
| ^ Washer, Adjusting, for gear wheel, 0.060" thick | 1 | E | 72976 | Crickmore |
| ^ Washer, Adjusting, for gear wheel, 0.070" thick | 1 | E | 72977 | Cridlane |
| Washer., Locking, for oil catcher | 2 | E | 73899 | Crinkse |
| Washer, Locking, for drive shaft nut | 1 | E | 70462 | Crippsday |
| Washer Locking, for drive shaft bearing nut | 1 | E | 73269 | Crisfield |
| Washer, Retaining, for dynamo coupling | 1 | G | 2851 | Motherly |
| Wheel, Gear, for dynamo and magneto drive | 1 | E | 70450 | Critchel |
§ ^ Alternatives
